Dodge Nitro 2.8 CRD 177/460
ECU Remapping
Dodge Nitro 2.8 CRD 177/460. Standard and remapped figures for this exact engine.
- Fully dyno tested remaps
- 30 day money back guarantee
- Lifetime software warranty
- UK-wide local network
Remap stats
Dodge Nitro 2.8 CRD 177/460: standard vs remapped
Diesel engine. Indicative stage 1 figures, fully dyno tested.
Power
+37 bhp · +21%- Standard177 bhp
- Remapped214 bhp
Torque
+65 Nm · +14%- Standard460 Nm
- Remapped525 Nm
Tuning figures are indicative estimates, not guaranteed results. Actual results depend on the condition of the vehicle.
Prices from £130
Fully dyno tested | 30 day money back guarantee | Lifetime software warranty
Out of the box the Dodge Nitro 2.8 CRD 177/460 gives 177 bhp and 460 Nm. Remapped across the UK, we record 214 bhp and 525 Nm, so 37 bhp and 65 Nm more, or 21% and 14% respectively.
These are indicative figures for a diesel Dodge Nitro in good health. Your own results depend on the condition of the car.
Dodge Nitro 2.8 CRD 177/460 power and torque after remapping
- Fuel: Diesel
- Standard power: 177 bhp, remapped: 214 bhp (+37 bhp, +21%)
- Standard torque: 460 Nm, remapped: 525 Nm (+65 Nm, +14%)
- Service: stage 1 ECU remap, fully dyno tested
What a remap does for a diesel Dodge Nitro
Modern diesels are held back by conservative factory calibrations. A remap updates the fuel and boost maps stored in the ECU, which is why drivers notice stronger acceleration from low revs and less need to change down on hills or when loaded.
How the Dodge Nitro 2.8 CRD 177/460 compares
Among the 2 diesel Nitro engines we have figures for, the 2.8 CRD 177/460 ranks 1st for power gain, exactly the Nitro diesel average.
Across our whole catalogue the average diesel remap adds 34 bhp and 73 Nm, so this engine's 37 bhp and 65 Nm sits at or above that benchmark.
Remapping your Dodge Nitro across the UK
Remap Experts is a UK network of local remapping sites. Use Find a Local Tuner to reach your nearest site and get an exact quote.
All our remaps are fully dyno tested, backed by a 30 day money back guarantee and covered by a lifetime software warranty. Request a quote online or call 0800 779 7864.
Ready for ECU remapping on your Dodge Nitro?
Send your details and a specialist will confirm what is possible for your engine.
Included
What we can do for your Dodge Nitro
Stage 1 ECU remap
Add power and torque and improve driveability. Software only, tailored to your engine.
ECU repair and testing
Is your engine control unit playing up? We can arrange testing and repair, and source replacement ECUs.
DPF and EGR fault repair
Persistent DPF or EGR errors diagnosed and resolved in accordance with all current road-legal standards.
Engine carbon cleaning
Fault finding and carbon cleaning for the inside of your engine, typically completed in a couple of hours.
Same model
Other Nitro engines
From quote to remapped in four steps
No jargon and no pressure. Here is exactly what happens.
- 01
Find your vehicle
Choose your make, model and engine to see the standard and remapped power and torque for your car.
- 02
Request a quote
Send your details and we contact you by SMS or call back with a quote. No obligation.
- 03
Book with your local site
Your local Remap Experts site arranges the remap and answers any questions about your car.
- 04
Remapped and dyno tested
Your remap is fully dyno tested, with a 30 day money back guarantee and a lifetime software warranty.
Everything you need to know
Plain-English guides to how remapping works, what it does and what to check first.
- 6 min read
What is ECU remapping?
The engine control unit, what a remap changes, and who it suits.
Read guide - 5 min read
The benefits of ECU remapping
More torque, better driveability and the potential for better economy.
Read guide - 6 min read
How ECU remapping works, step by step
From reading the original software to the dyno test.
Read guide